Model | TD 3000 |
Power Specifications |
Continuous Power | 4 x 340 Watts at 8 ohms (0.5% THD) | 4 x 550 Watts at 4 ohms | 2 x 1500 Watts at 8 ohm (Bridged mono mode) |
|
Electrical Specification |
Input Sensitivity | 1.0V |
Input Impedance | 10K Unbalanced |
Frequency Response | 20Hz – 20KHz (+0dB / -3dB) |
Voltage Gain | 32dB |
Distortion | (SMPTE: 1M) <0.5% |
S/N Ratio | 110dB |
Inrush Current at initial switch on | 16.96A |
Inrush Current after power supply interruption | 19.62A |
General Specifications |
Front Controls | AC power switch, 2 channel level control; -8 to +30 dB |
Rear Controls | 30 Hz high-pass filter on/off, bridge/stereo/parallel mode |
Signal Indicators | Signal present (green LED), Clip (red LED), protection (red LED) |
Power Indicators | 1 blue LED integrated with power switch |
Protection | On/Off, mute, DC-fault, load |
Input Connectors | Balanced XLR-F / 1/4" Combo |
Power Supply | 100VAC or 110-120VAC or 220-240VAC (50Hz/60Hz) |
Dimensions Width / Large / High | 19” x 14.8” x 3.5” (483 x 376 x 88.8mm) |
Weight | 7.9 Kg (17.6 Lbs) |
